Products and Services

Products and Services

  info@alemlube.com.au  1300 159 311
Product

125/250cc V125/Empty - Single Point Grease Lubricators

Pulsarlube

Product Code: V125/EMPTY

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• IP Code: IP68 
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases, and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube
• 3/8” BSP male connecting thread
• Dispensing period 1,3,6,9 and 12 months.

Product

250cc SV PL1 - Single Point Grease Lubricators

Pulsarlube

Product Code: SV250/PL1

• Highly cost effective & simple to operate
• Resistant to temperature variation that means volume and amount of gas remaining constant.
• Easy to adjust dispensing period while in operation
• Instant on & off
• Easy to install without the use of tools
• Available with 60, 120 & 240cc

Product

250cc V Empty - Single Point Grease Lubricators

Pulsarlube

Product Code: V250/EMPTY

• Highly cost effective & simple to operate
• Resistant to temperature variation that means volume and amount of gas remaining constant.
• Easy to adjust dispensing period while in operation
• Instant on & off
• Easy to install without the use of tools
• Available with 60, 120 & 240cc

Product

500cc SV PL1 - Single Point Grease Lubricators

Pulsarlube

Product Code: SV502/PL1

The Service Pack must be replaced when monthly cycle is finished

Service Pack consists of
• A grease pouch of selectable lubricant type in various volumes
• An OEM battery pack : DC 4.5V Alkaline battery pack (standard) or DC 4.5V Lithium battery pack

* Note: A battery pack is not included in the MSP and PLC service packs
A disposable dust cover: PVC dust cover (standard) or U/V protection dust cover

* Note: A dust cover is not included in the PLC service packs

• 60,125, 250 & 500 available with different grease options: contact us

Product

E 120cc PL1 - Single and Multi Point Grease Lubricator

Pulsarlube

Product Code: E120/PL1

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• IP code: IP68
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases, and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube
• 1/4” BSP male connecting thread
• Dispensing period 1,3,6,9 and 12 months.

Product

E 240cc Empty - Single Point Grease Lubricators

Pulsarlube

Product Code: E240/EMPTY

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube

Product

E 240cc PL1 - Single Point Grease Lubricators

Pulsarlube

Product Code: E240/PL1

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube

Product

E 60cc Empty - Single Point Grease Lubricators

Pulsarlube

Product Code: E60/EMPTY

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube

Product

E 60cc PL1 - Single Point Grease Lubricators

Pulsarlube

Product Code: E60/PL1

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube

Product

M 125cc Main - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M125/MAIN

• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

M 125cc PL1 - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M125/PL1

• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

M 250cc Main - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M250/MAIN

• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

M 250cc PL1 - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M250/PL1

• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

M 500cc Main - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M500/MAIN

• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

M 60cc Main - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M60/MAIN

• Pumps grease up to 30bar
• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 12

M125/250: Minimum 1/2 month to maximum 12 months
M500: Minimum 1/2 month to maximum 24 months

Product

M 60cc PL1 - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M60/PL1

• Pumps grease up to 30bar
•  Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

Multi-point Complete Kit

Pulsarlube

Product Code: 1250MD-2-8

• Remote installation lubricates 8 greasing points
• Operating pressure of 425psi (29bar)
• Consists of a vertical pump, motor/gear set and microprocessor
• Ideal for hard to reach/hazardous greasing locations such as electric motors, pumps, conveyors, fans and cranes
• Kits are available to suit 2, 3, 4, 5, 6, 7 & 8 greasing points
• Actual lubricator not included

Product

Pulsarlube AIR® Desiccant Breather

Pulsarlube

Product Code: AB-PX102

• Maximum air flow 20cfm
• Maximum adsorption capacity 538ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 1,320g
• Mounting connection 1" slip felt
• Height 26.1cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather

Pulsarlube

Product Code: AB-PX101

• Maximum air flow 20cfm
• Maximum adsorption capacity 279ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 660g
• Mounting connection 1" slip felt
• Height 17.2cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather

Pulsarlube

Product Code: AB-PX100

• Maximum air flow 20cfm
• Maximum adsorption capacity 160ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 440g
• Mounting connection 1" slip felt
• Height 14cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather with 1" Adaptor

Product Code: AB-PD102C

• Maximum air flow 20cfm
• Maximum adsorption capacity 538ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 1,320g
• Mounting connection 1" slip felt
• Height 26.1cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather with 1" Adaptor

Pulsarlube

Product Code: AB-PD101C

• Maximum air flow 20cfm
• Maximum adsorption capacity 279ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 660g
• Mounting connection 1" slip felt
• Height 17.2cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather with 1" Adaptor

Pulsarlube

Product Code: AB-PD100C

• Maximum air flow 20cfm
• Maximum adsorption capacity 160ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 440g
• Mounting connection 1" slip felt
• Height 14cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather with 1/2" Adaptor

Product Code: AB-PD102B

• Maximum air flow 20cfm
• Maximum adsorption capacity 538ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 1,320g
• Mounting connection 1" slip felt
• Height 26.1cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather with 1/2" Adaptor

Pulsarlube

Product Code: AB-PD101B

• Maximum air flow 20cfm
• Maximum adsorption capacity 279ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 660g
• Mounting connection 1" slip felt
• Height 17.2cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather with 1/2" Adaptor

Pulsarlube

Product Code: AB-PD100B

• Maximum air flow 20cfm
• Maximum adsorption capacity 160ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 440g
• Mounting connection 1" slip felt
• Height 14cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather with 3/8" Adaptor

Pulsarlube

Product Code: AB-PD102A

• Maximum air flow 20cfm
• Maximum adsorption capacity 538ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 1,320g
• Mounting connection 1" slip felt
• Height 26.1cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather with 3/8" Adaptor

Pulsarlube

Product Code: AB-PD101A

• Maximum air flow 20cfm
• Maximum adsorption capacity 279ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 660g
• Mounting connection 1" slip felt
• Height 17.2cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube AIR® Desiccant Breather with 3/8" Adaptor

Pulsarlube

Product Code: AB-PD100A

• Maximum air flow 20cfm
• Maximum adsorption capacity 160ml
• Maximum reservoir fluid flow 150gpm
• 100% Silica desiccant gel - 440g
• Mounting connection 1" slip felt
• Height 14cm Diameter 14.07cm
• Extended service life
• Long lasting shelf life
• Effective removal of contaminants
• Electret Filter (particle size > 2) removes airborne dirt, dust, and other undesirable particles by electrostatic charge
• Activated Carbon Filter: Removes moisture, fumes and odour
• Desiccant: Silica gel will turn from orange to green as it absorbs moisture from incoming air
• Baffle Plate: Protects silica gel from oil mist contamination
• Oil Absorbent Foam: Absorbs oil mist drawn from reservoir

Product

Pulsarlube Explosion Proof Grease Lubricator

Pulsarlube

Product Code: EXP480

• Grease pouch capacity of 480ml (replaceable)
• Dispenses 0.34ml/stroke at 20ºC
• Dispensing periods of 1,2,3,6,9 and 12 months
• IECEx & ATEX & KCs & NEPSI certified
• IP65 - dust tight and protected against water jets
• Auto lock out mode to prevent unintentional mode changes
• Easy to check LCD displays with backlight function
• Power supply: DC 4.5V Battery Pack (replaceable)
• Remote installation possible up to 6m with 6mm tube

IP Code: IP65

Product

Pulsarlube Oil Lubricators

Pulsarlube

Product Code: E060. E060. E0240

Product Sizes: 

60ml: 77mm   92mm

120ml: 77mm  112mm

240ml: 77mm  157mm


• Oil Capacity – 60ml / 120ml / 240ml


• Maximum Pressure – 5kgf/cm (70psi)

• Operating Temperature – -20˚C~55˚C

• Oil Viscosity Range – 100~10,000 cSt@40˚C

• Installation Thread Size – 1/4" Male NPT & BSPT compatible

• Gas Type – Nitrogen (N2) Gas

• Available Dispensing Periods – 1, 3, 6, 9 & 12 months

• Certifications / IP code – CE / ATEX / UL / IP68

• Remote Installation – Up to 3m using a 4mm O.D. pre-filled lube line