Product Code: 453000
Product Code: 660AN
Product Code: service5
Automatic lubrication systems can assist greatly in increasing plant reliability and reducing the amount of labour tied up in routine maintenance.
At one Queensland coal mine Alemlube was asked to design automatic greasing systems which would ensure that all conveyor grease points were automatically greased and that the labyrinths were kept topped up several times a day.
Lubrication Solutions
It was thought that bearing life could be greatly improved and that maintenance resources could then be redirected to other pressing tasks. Additionally, the automatic greasing system was to be completely remotely monitored and be able to detect blocked bearings and stiff bearings – thus providing early warning of problem bearings and allowing corrective action on or before the next shutdown occurred.
The systems were designed using progressive dividers which are the only way to accurately monitor lubricant volumes to large numbers of grease points.
All drives, drive pulleys, bend pulleys and GTUs are connected to the systems. In addition, counterweight pulleys and winches are also included. 20kg pneumatic drum pumps were chosen to fit in with maintenance operations. Drums are renewed easily by hand as required.
Product Code: 14512
Product Code: G10040N
Product Code: B336770
• Alemite USA made
• Snaps into all standard grease couplers
• Permits greasing of sealed bearings and CV joints
• Comes with plastic needle cover to protect when not in use
• For use with hand grease guns only
• Needle length 1.44 to 1.53" made from stainless steel
• Overall length 2.0 to 2.125"
Product Code: 600A
Product Code: 14511
Product Code: 428262
Kit comes complete with a 55:1 ratio pump plus drum cover, follower plate, 2m of hose, z swivel and control valve
Can develop up to 7,950psi
Delivers up to 0.8kg per minute
(Drum not included)
Integral filter protects pump from foreign particle contamination
Will handle high density, tacky greases up to NLGI2
Covered by a unique two year warranty
Quiet operation due to exhaust muffler
Cast alloy dual cylinder air motor guarantees a long service life
Ideal for busy workshops where greasing is undertaken all day, every day
Product Code: 425150
Kit comes complete with a 55:1 ratio pump 407200, plus drum cover, follower plate, 2m of hose, z swivel, control valve and 431000T trolley.
Can develop up to 7,950psi & delivers up to 0.8kg per minute.
Delivers up to 0.8kg per minute
Integral filter protects pump from foreign particle contamination
Will handle high density, tacky greases up to NLGI2
Covered by a unique two year warranty
Quiet operation due to exhaust muffler
Cast alloy dual cylinder air motor guarantees a long service life
Ideal for busy workshops where greasing is undertaken all day, every day
Product Code: 108501
Medium pressure hand grease pump with 1.5m hose & a 2-HK (1/4") hydraulic type connector for filling the reservoirs of Centralised greasing systems such as Beka Mak kits.
Pump delivery per stroke: 100gm
Suits 20kg drums
Includes ¯ 310 mm drum cover & follower plate.
Product Code: G10030
EL Series model
Develops grease pressures of up to 6,000psi
Continuous grease flow ensures effortless greasing
Three way loading
Exclusive air piston design ensures consistent priming
450 gram cartridge capacity
Includes a 300mm long grease gun flex and four jaw coupler
Suits greases up to NLGI2
Product Code: A14512
• Works with all grease gun types - pneumatic, manual and battery
• 1/8” BSPT(f) thread
• Maximum working pressure of 10,000psi (690bar)
• Fits all metric and SAE specification grease nipples
• 4 hardened spring steel jaws resilient under high pressure
• Durable nitrile rubber seal for longevity under high pressure
• Suitable for high pressure, heavy duty greasing applications
• 90mm in length
• Sliding sleeve locks the quick release coupler onto the nipple
• No need to hold while greasing
• Lock-on and free up both hands to operate your grease gun
• Eliminates hydraulic lockout
• Easy disconnection regardless of hydraulic pressure build up in the line
• Weighs only 100g
• Also available 14511, suitable for NPT specification thread
Product Code: 200A
Identical to our famous 600A but in a 400gm version to suit European and USA grease cartridges.
Lever Action Grease Gun - 400gm or bulk grease
Develops grease pressures of up to 12,000psi
Coarse thread on barrel assembly eliminates the possibility of cross threading during cartridge change over
Unique Twin Lock System eliminates the possibility of dummy lubrication
Patented Ever-Flow System enables the gun to handle thick biodegradable greases even at low temperatures
Large diameter piston with a long lever travel facilitates high volume greasing
Delivers up to 1.6cc of grease per stroke
High volume, high pressure greasing guaranteed
Made in Germany
Product Code: 425170
kit comes complete with a 55:1 ratio pump plus drum cover, follower plate, 2m of hose, z swivel and control valve to suit 55kg grease drums
Can develop up to 7,950psi
Delivers up to 0.8kg per minute
Integral filter protects pump from foreign particle contamination
Will handle high density, tacky greases up to NLGI2
Covered by a unique two year warranty
Quiet operation due to exhaust muffler
Cast alloy dual cylinder air motor guarantees a long service life
Ideal for busy workshops where greasing is undertaken all day, every day
Product Code: 6336N
• Grease pressures of up to 10,000psi (690bar)
• Foot operated design leaves hands free to access difficult to access lube points
• Up to 30 shots before the hand piece needs to be reloaded with grease
• High volume or high pressure option reduces greasing down time
• 360º swivel eliminates annoying hose tangling
• Manufactured in Germany
Product Code: 500
Alemite USA made.
Includes rigid extension & coupler.
Can develops up to 10,000 psi of greasing pressure.
Three way loading: 400gm cartridge, suction or bulk loader pump.
Features automatic variable stroke/pressure, air vent, vinyl grip & loader fitting. Delivers up to 1.35gm's per stroke.
Suits US and European 400gm grease cartridges.
Product Code: M500/MAIN
• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24
Product Code: M250/MAIN
• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24
Product Code: 200ACB
Identical to our famous 600A but in a 400gm clear barrel version to suit European and USA grease cartridges. Lever Action Grease Gun - 400gm or bulk grease. Ideal for specialised greasing, in particular when using more expensive grease typically used for lubricating food grade equipment and for critical
grease points. The 200ACB with its clear acrylic barrel is differentiated from the traditional grease gun steel barrel and presents the
real benefit of clearly identifying the type of grease cartridge loaded into the gun.
Develops grease pressures of up to 12,000psi
Coarse thread on barrel assembly eliminates the possibility of cross threading during cartridge change over. Unique Twin Lock System eliminates the possibility of dummy lubrication
Patented Ever-Flow System enables the gun to handle thick biodegradable greases even at low temperatures
Large diameter piston with a long lever travel facilitates high volume greasing
Delivers up to 1.6cc of grease per stroke
High volume, high pressure greasing guaranteed
Made in Germany
Product Code: 428263
Kit comes complete with a 55:1 ratio pump plus drum cover, follower plate, 2m of hose, z swivel, control valve and 336899 dolly (not pictured)
Can develop up to 7,950psi
Delivers up to 0.8kg per minute
(Drum not included)
Integral filter protects pump from foreign particle contamination
Will handle high density, tacky greases up to NLGI2
Covered by a unique two year warranty
Quiet operation due to exhaust muffler
Cast alloy dual cylinder air motor guarantees a long service life
Ideal for busy workshops where greasing is undertaken all day, every day
Product Code: B200
Snaps into all standard grease couplers
Permits greasing of sealed bearings and CV joints
Comes with plastic needle cover to protect when not in use
Needle is 18GA by 1.5 inches long, made from stainless steel
Overall length approx 2 inches
For use with hand grease guns only
Product Code: A200
• Snaps into all standard grease couplers
• Permits greasing of sealed bearings and CV joints
• Comes with plastic needle cover to protect when not in use
• For use with hand grease guns only
Product Code: 660ANCB
Product Code: A14510
Product Code: M250/PL1
• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24
Product Code: M125/PL1
• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24
Product Code: 428242
Kit comes complete with a 55:1 ratio pump plus drum cover, follower plate, 8ft of hose, z swivel, control valve & 180kg trolley as shown
Can develop up to 7,950psi
Delivers up to 0.8kg per minute
Integral filter protects pump from foreign particle contamination
Will handle high density, tacky greases up to NLGI2
Covered by a unique two year warranty
Quiet operation due to exhaust muffler
Cast alloy dual cylinder air motor guarantees a long service life
Ideal for busy workshops where greasing is undertaken all day, every day
Product Code: 660AS
Product Code: M125/MAIN
• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24
Product Code: 6336
• Grease pressures of up to 10,000psi (690bar)
• Foot operated design leaves hands free to access difficult to access lube points
• Up to 30 shots before the hand piece needs to be reloaded with grease
• High volume or high pressure option reduces greasing down time
• 360û swivel eliminates annoying hose tangling
• Manufactured in Germany
Product Code: 660ANP
• Contaminant free protection for your 660AN grease gun & greasing accessories
• Convenient & handy storage for an extra grease cartridge
• Grease pressures of up to 8,500psi (586bar)
• High volume or high pressure option facilitates fast and efficient greasing
• Patented Ever-Flow System enables the use of thick tacky greases even in the coldest conditions
Product Code: 600AS
Product Code: 410A
• High capacity gun
• 80cm flexible extension
• Quality 4 jaw coupler
• Develops grease pressure of up to 11,200psi (800bar)
• Delivers up to 2.5g of grease per stroke
• Light weight at 1.6kg
• High volume, high pressure greasing guaranteed
Product Code: 610A
Speedy Grease Gun
• 80cm flexible extension
• Quality 4 jaw coupler
• Develops grease pressure of up to 11,200psi (800bar)
• Delivers up to 2.5g of grease per stroke
• Light weight at 1.6kg
• High volume, high pressure greasing guaranteed
• Sturdy and durable construction
• Suitable for 450g cartridge
• Newton magnetic allows for convenient one hand operation
• No wearable parts
• No waste, quick, easy and clean greasing
• Suitable for transport, earthmoving, agricultural and mining applications
Product Code: A14511
• Works with all grease gun types - pneumatic, manual and battery
• 1/8” NPT thread
• Maximum working pressure of 10,000psi (690bar)
• Fits all metric and SAE specification grease nipples
• 4 hardened spring steel jaws resilient under high pressure
• Durable nitrile rubber seal for longevity under high pressure
• Suitable for high pressure, heavy duty greasing applications
• 90mm in length
• Sliding sleeve locks the quick release coupler onto the nipple
• No need to hold while greasing
• Lock-on and free up both hands to operate your grease gun
• Eliminates hydraulic lockout
• Easy disconnection regardless of hydraulic pressure build up in the line
• Weighs only 100g
Product Code: M500/PL1
• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24
Product Code: M60/MAIN
• Pumps grease up to 30bar
• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 12
M125/250: Minimum 1/2 month to maximum 12 months
M500: Minimum 1/2 month to maximum 24 months
Product Code: M60/PL1
• Pumps grease up to 30bar
• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24
Product Code: 597F
• Powerful 4.0Ah battery plus 2.5Ah spare battery standard
• Delivery rates of up to 170 g/min
• Grease pressure of up to 10,000psi (690bar)
• Up to 39 x 400g cartridges per battery charge
• Dual flow rates: 113 g/min and up to 170 g/min
• LCD for real time battery capacity, grease level and metering
• Loss of priming and stall warning indication
• Fast recharger time of 2 hours, LED light with on/off control
• Suitable for use with grease up to NLGI2
• Three way loading: 400g cartridge, bulk grease or filler pump
• Ball and needle bearings
• Curved slot yoke optimises mechanical efficiency
• Case hardened piston for wear and bend resistance
• Impact resistant LCD lens and impact absorbing bezel
• Patented air flow management optimises motor and transmission life
• Shape, weight and balance designed for less physical strain
• Fast effortless greasing guaranteed
Also available:
670AN5 450g 20V Lithium-ion Cordless Grease Gun
660AS Underground Coal Mine Trigger Action Grease Gun
600A Lever Action Grease Gun
600AS Underground Coal Mine Lever Action Grease Gun
200A 400g Lever Action Grease Gun
220A 400g Trigger Action Grease Gun
Product Code: 1250MD-2-8
• Remote installation lubricates 8 greasing points
• Operating pressure of 425psi (29bar)
• Consists of a vertical pump, motor/gear set and microprocessor
• Ideal for hard to reach/hazardous greasing locations such as electric motors, pumps, conveyors, fans and cranes
• Kits are available to suit 2, 3, 4, 5, 6, 7 & 8 greasing points
• Actual lubricator not included
