Products and Services

Products and Services

  info@alemlube.com.au  1300 159 311

Single and multi point grease lubricators

Product

125/250cc V125/Empty - Single Point Grease Lubricators

Pulsarlube

Product Code: V125/EMPTY

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• IP Code: IP68 
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases, and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube
• 3/8” BSP male connecting thread
• Dispensing period 1,3,6,9 and 12 months.

Product

250cc SV PL1 - Single Point Grease Lubricators

Pulsarlube

Product Code: SV250/PL1

• Highly cost effective & simple to operate
• Resistant to temperature variation that means volume and amount of gas remaining constant.
• Easy to adjust dispensing period while in operation
• Instant on & off
• Easy to install without the use of tools
• Available with 60, 120 & 240cc

Product

250cc V Empty - Single Point Grease Lubricators

Pulsarlube

Product Code: V250/EMPTY

• Highly cost effective & simple to operate
• Resistant to temperature variation that means volume and amount of gas remaining constant.
• Easy to adjust dispensing period while in operation
• Instant on & off
• Easy to install without the use of tools
• Available with 60, 120 & 240cc

Product

500cc SV PL1 - Single Point Grease Lubricators

Pulsarlube

Product Code: SV502/PL1

The Service Pack must be replaced when monthly cycle is finished

Service Pack consists of
• A grease pouch of selectable lubricant type in various volumes
• An OEM battery pack : DC 4.5V Alkaline battery pack (standard) or DC 4.5V Lithium battery pack

* Note: A battery pack is not included in the MSP and PLC service packs
A disposable dust cover: PVC dust cover (standard) or U/V protection dust cover

* Note: A dust cover is not included in the PLC service packs

• 60,125, 250 & 500 available with different grease options: contact us

Product

60cc SV PL1 - Single Point Grease Lubricators

Pulsarlube

Product Code: SV60/PL1

• Available with 60, 125, 250 & 500cc

Product

E 120cc Empty - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: E120/EMPTY

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube

Product

E 120cc PL1 - Single and Multi Point Grease Lubricator

Pulsarlube

Product Code: E120/PL1

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• IP code: IP68
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases, and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube
• 1/4” BSP male connecting thread
• Dispensing period 1,3,6,9 and 12 months.

Product

E 240cc Empty - Single Point Grease Lubricators

Pulsarlube

Product Code: E240/EMPTY

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube

Product

E 240cc PL1 - Single Point Grease Lubricators

Pulsarlube

Product Code: E240/PL1

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube

Product

E 60cc Empty - Single Point Grease Lubricators

Pulsarlube

Product Code: E60/EMPTY

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube

Product

E 60cc PL1 - Single Point Grease Lubricators

Pulsarlube

Product Code: E60/PL1

• Electro-chemical gas type single point lubricator
• Highly cost effective & simple to operate 
• Generates inert Nitrogen (N2) gas
• More reliable against ambient temperature variations than hydrogen gas type lubricators
• Easy to adjust dispensing period while in operation, instant on/off
• Maximum operating pressure of 70psi (5bar) and temperature up to 55°C 
• Intrinsically safe Ex ia IIC T4
• The Pulsarlube E Series can be used in hazardous locations containing flammable liquids, vapours, gases and dust
• IECEx, ATEX certified & IP68 protection class
• Can be installed remotely up to 1m with 8mm OD tube

Product

M 125cc Main - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M125/MAIN

• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

M 125cc PL1 - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M125/PL1

• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

M 250cc Main - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M250/MAIN

• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

M 250cc PL1 - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M250/PL1

• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

M 500cc Main - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M500/MAIN

• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

M 500cc PL1 - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M500/PL1

• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

M 60cc Main - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M60/MAIN

• Pumps grease up to 30bar
• Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 12

M125/250: Minimum 1/2 month to maximum 12 months
M500: Minimum 1/2 month to maximum 24 months

Product

M 60cc PL1 - Single and Multi Point Grease Lubricators

Pulsarlube

Product Code: M60/PL1

• Pumps grease up to 30bar
•  Not affected by temperature or bearing back pressure
• It is reusable & refillable via service packs (bladders & batteries)
• Can be mounted up to 6m away from the bearing & can supply up to 8 greasing points via progressive divider block
• Easy to read LCD display with bearing blockage alarm time remaining till empty feedback
• Available with 60,125, 250 & 500cc capacity with discharge rates of 1 month up to MAX 24

Product

SV Empty - Single Point Grease Lubricators

Pulsarlube

Product Code: V250/EMPTY

• Highly cost effective & simple to operate
• Resistant to temperature variation that means volume and amount of gas remaining constant
• Easy to adjust dispensing period while in operation
• Instant on & off
• Easy to install without the use of tools
• Available with 125, and 250cc

Product

V125/PL1 - Single Point Grease Lubricators

Pulsarlube

Product Code: SV125/PL1

• Easy to replace by hand no tool required
• Available with 60, 125, 250 & 500cc